* NAS Navigator2 (Mac) Ver.2.52

Name			NAS Navigator2 (Mac)
Version			Ver.2.52
File			nasnavi-252_mac.dmg.zip
Size			14,128,851 Bytes
Date			September 12, 2012
Platform		Intel Mac
OS			Mac OS X 10.3.9 or later / 10.4 or later / 10.5 or later / 10.6 or later / 10.7 or later
Product			LinkStation/TeraStation Series
Copyright		BUFFALO INC.
Distribution	        ZIP archive
Condition		Re-distribution is not allowed.
Manual			Quick Setup Guide
			Reference Guide

[Software description]
This software is a utility of LinkStation & TeraStation to scan,
browse Web setting screen or change unit IP address.

[Caution]
- Only Intel Mac has been supported since Ver.2.40.
If you are using PowerPC Mac, use older than Ver.2.40.

- If NAS Navigator 2 older than Ver.2.52 is installed, uninstall the old version before installing this version.

- If using Power Management with PC, you need to configure [Auto Power Mode Setting] in NAS Navigator2.
You can modify [Auto Power Mode Setting] when first time booting it or by clicking NAS while pressing the command key and select [Auto Power Mode Setting]. Follow the instructions on the screen to change the configuration.

[How to install]
This software is compressed by ZIP archiver.

1. Double click the extract file, The volume is mounted on the desktop.

2. Copy "NASNavigator2" in the mounted volume to "Applications" folder.

3. Restart "NASNavigator2" in the "Applications" folder.

[How to uninstall]
This software is compressed by ZIP archiver.

1. Boot NAS Navigator2, click NAS while holding the command key, and click [Auto Power Mode Setting].

2. Unselect "Transmit the power state to NAS." In [Auto Power Mode Setting] and click [OK]. 

3. Exit NAS Navigator2.

4. Move "NASNavigator2" in the "Applications" folder to Trash, and perform "Empty Trash".


[Software Release Note]
* Ver.2.52
- Fixed RAID configuration to be showed correctly.
- Additional icon of TS5600.

* Ver.2.51
- Compatible with TS5x00 series.

* Ver.2.43
-Additional Infomation notices of I54.

* Ver.2.41
-Compatible with LS-XL series.

* Ver.2.40
- Compatible with Mac OS X 10.7.
- Added [Power management with PC configuration] feature (You can now select if notifying the power state to NAS or not).
- Fixed the problem that the dialog which requested the communication permission with NAS Navigator2 was displayed many times when Firewall was enabled.
(If receiving transmission is permitted on the older version, delete the registration of version in System Preferences).x 

* Ver.2.34
- Compatible with WS-WVL, WS-QVL, WS-6VL,WS-RVL series.

* Ver.2.33
- Compatible with TS-WVHL, TS-QVHL, TS-6VHL, TS-8VHL, TS-RVHL series.

* Ver.2.31
- Compatible with LS-QVL series.

* Ver.2.30
- Compatible with LS-VL and LS-WVL series.

* Ver.2.29
- Additional infomation notices of TS-X series.

* Ver.2.28
- Solved the problem HDD Information of TS-X Series were not displayed.

* Ver.2.26
- Support Mac OS X 10.6.
(Solved Auto Mode function problem completely.)

* Ver.2.24
- Compatible with LS-WXL/E.

* Ver.2.23
- Compatible with TS-XEL, LS-SL(-V2) series.

* Ver.2.22
- Compatible with LS-WXL, LS-WSXL series.
- Solved Auto Mode function problem with Mac OS X 10.6.

* Ver.2.21
- Compatible with WS-QL series.

* Ver.2.20
- Compatible with TS-RXL series.

* Ver.2.19
- Compatible with LS-SL series.
- Solved appearing two NASNavigator2 icon in Dock frequently.

* Ver.2.18
- Compatible with LS-CHL(-V2) series.

* Ver.2.17
- Support TS-XL series capacity and spare disk display.
- Compatible with TS-WXL series.

* Ver.2.16
- Compatible with LS-XHL 1.5TB model.

* Ver.2.15
- Compatible with TS-XL, LS-QL series.

* Ver.2.14
- Compatible with LS-XHL series.

* Ver.2.13
- Compatible with TS-HTGL 6.0TB model.

* Ver.2.12
- New release.