* LinkStation Series Firmware Updater Ver.1.60 Name LinkStation Series Firmware Updater Version Ver.1.60 File LS_SERIES-160_fwmac.dmg Size 246,167,069 Bytes Date July 5, 2012 Platform Intel Mac OS Mac OS X 10.3.9 or later Model LS-XHL, LS-CHL, LS-WXL, LS-WSXL, LS-VL, LS-WVL, LS-QVL, LS-XL Series Copyright BUFFALO INC. Distribution Distribution DMG archive Condition Re-distribution is not allowed. Manual Quick Setup Guide Reference Guide This product uses GPL/LGPL applicable software and your are welcome to have, modify and redistribute these source codes. Please ask our technical support people about modified GPL, applicable module and how to deliver them. You may be charged for delivery cost. [Software description] This software is LinkStation Series Firmware Update Utility to update unit firmware to Ver.1.60. If your unit firmware is Ver.1.60 or later version, you do not have to use this utility. * If the LinkStation became EM Mode, firmware update might recover the unit. [How to confirm firmware version] Select LinkStation from NAS Navigator2 utility search screen. The firmware version is displayed right and bottom corner in the status screen. If the unit name shown LS-***-EM*** in the status screen, the LinkStation becomes EM (Emergency) mode. [Caution] - Please consult you local representative if you experience malfunction problem cause by firmware update. - Do not turn the unit off until complete messages appear. It might takes several minutes in the case. - After Ver.1.51, due to adding online update features and error and information codes, when TeraStation detects the online update, the message "I52:Unknown error occurred" is displayed depending on the version of the NAS Navigator2 you are using. Please update to the latest NAS Navigator2. [How to use updater] 1. Extract the file you have downloaded. 2. Please execute "update", refer to the screen instruction. [Firmware Release Note] Version 1.60 [2012.7.5] - fixes several Samba security problems (CVE-2012-1182).