* LinkStation Series Firmware Updater Ver.1.40

 Name		  LinkStation Series Firmware Updater
 Version	  	  Ver.1.40
 File		  ls_series-140.zip
 Size		  241,804,288 Bytes
 Date		  Dec 28, 2010
 Platform	  	  DOS/V, PC98-NX
 OS 		  Windows 2000/XP/Vista/7
 Model		  LS-XHL, LS-WXL, LS-WSXL, LS-VL, LS-WVL, LS-QVL Series
 Copyright		  BUFFALO INC.
 Distribution	  ZIP archive (Created by LHMelt. LHMelt intellectual properties belongs to Mr.Micco.)
 Condition		  Re-distribution is not allowed.
 Manual 	  	  Quick Setup Guide
		  Reference Guide
 This product uses GPL/LGPL applicable software and your are welcome to
 have, modify and redistribute these source codes.
 Please ask our technical support people about modified GPL, applicable
 module and how to deliver them. You may be charged for delivery cost.

[Software description]
This software is LS-XHL, LS-WXL, LS-WSXL, LS-VL, LS-WVL, LS-QVL Series Firmware Update Utility to update unit firmware to Ver.1.40.
If your unit firmware is Ver.1.40 or later version, you do not have to use this utility.

* If the LinkStation became EM Mode, firmware update might recover the unit.

[How to confirm firmware version]
Select LinkStation from NAS Navigator2 utility search screen.
The firmware version is displayed right and bottom corner in the status screen.
If the unit name shown LS-***-EM*** in the status screen, the LinkStation becomes EM (Emergency) mode.

[Caution]
- Please consult you local representative if you experience malfunction problem cause by firmware update.
- Do not turn the unit off until complete messages appear. It might takes several minutes in the case.

[How to use updater]
1. Connect the TeraStation properly and configure a computer which runs the updater and TeraStation so that both of them have the same network address. 
 * For example, IP address / subnet mask of the computer is 
  " 192.168.0.10 ¡¿ 255.255.255.0 "
  and IP address / subnet mask of the TeraStation is 
  " 192.168.1.150 ¡¿ 255.255.255.0 "
  then they do not work properly. 
  In such a case, reconfigure these values for the TeraStation to  
  " 192.168.0.150 ¡¿ 255.255.255.0 "
2. Exit all applications which are currently running. Also, stop or exit firewall Since update cannot be performed while firewall software and such is running. 
3. Extract the downloaded file and run "TSUpdater.exe" which is included in the extracted file. After the TeraStation is found, a screen is displayed. 
4. Select the TeraStation to update if multiple TeraStation are connected. 
5. Press the "Update" button to display the screen to enter the password.  
6. Enter the password and press "OK". 
7. Transferring and updating the firmware will start. Wait until it completes. 
¡¡* The info LED flashes while updating. 
8. Update is completed when the completed message is displayed. 


[Firmware Release Note]
* Ver.1.40 [2010.12.28]
  - Add Squeezebox Server.
  - Add USB Device Server (For LS-VL, LS-WVL, LS-QVL series only).
  - Add web service features (Flickr support and Eye-Fi connected).
  - Fixed FTP issue that shared folders are deleted when connecting via FTP.
  - Fixed USB drive backup failure issue when USB drive is formatted FAT.
  - Update WebAccess to version 3.2.
  - Add collaboration feature with other applications when accessing from iPhone/iPod touch/iPad.
      (Supported application needs to be installed.)
  - Support Motorola MILESTONE.
  - Improved picture quality of preview when accessing to mobile version of WebAccess.
  - Fixed the issue of multiple file download by a zip file when using an archive software supporting Unicode zip.
  - Italian revises the problem that is not displayed definitely in Web Setting Screen.